Some of you may recall how I posted this pic in a post a while back.
Finally… hands-free sock sniffing thanks to this nifty little sock holder I built.
All it took was three 1″ clips and a bit of elastic.#SockSmelling #SockSlave pic.twitter.com/MPt97m3Pkj— Jay Collared (@Collared4Cuties) August 18, 2018
Well, I was definitely ready to make one myself. I was fortunate enough to find spring clamps and black elastic in my local dollar store. But the one problem I was having was feeding the elastic through the holes in the spring clamps… the hole was too small and the elastic too big (how many of us have had that problem before, right guys?). So I wasn’t sure how to get them together.
Fortunately, I came up with an easy solution. I used some twisty ties (I happened to have some black ones around from old electronic equipment–I used white in the pics below for better visuals), feed that through the hole, and then tied the elastic around that and then knotted it (both the tie and the elastic). It was very easy, and surprisingly effective.
The third piece I just knotted directly onto the elastic. And I have to say, I’ve already used it on myself, and yes, it’s as hot as it looks.
Also keep in mind it could hold any smelly fabric… used underwear, used jock, piss soaked underwear… the possibilities are endless. Have fun!
